DJI DropSafe Rapid Parachute Deployment System for the S1000 and S900 and compatible with the DJI A2 Flight Controller. Available for Pre Order HERE

DJI DROPSAFE Drop Speed Reduction System, which is designed to slow the speed of your aircraft in the event of an emergency. It deploys in less than half a second, and is effective at a minimum altitude of 6 meters. The reusable design weighs less than 550g, adding very little weight to your flight payload.

Features of the DJI Dropsafe

Low Altitude Deployment

Minimum effective altitude of just 6 meters

Lightning Fast Deployment

Deploys in less than half a second.

Lightweight Design

Weighs less than 550g.

Reusable System

DUAL SAFETY MECHANISMS & SELF CHECKING LED

The DJI DropSafe has both electrical and mechanical safety mechanisms to ensure there is never any accidental deployment.

Electrical Safety: The electrical safety prevents the DJI DropSafe from deploying within 9 seconds of the system being powered on.

Mechanical Safety: A removable safety pin prevents the triggering pins from making contact with the firing mechanism. Users must remove the safety pin before the first flight, and may choose to replace the safety pin after each flight.

Also, a self-checking LED indicates the DropSafe system status. A green light will display after a full system check is complete, and other lights will display indicating different statuses.

Fully Compatible with the DJI S900 AND S1000 Premium and S1000+ Models.

Not recommended for the DJI S800.

Compatible with DJI Flight Controllers

Compatible with DJI A2 flight control systems and supports command inputs from RC transmitters. When using these systems, the motor power can be set to automatically cut off when the DropSafe is deployed.

Supported Flight Control Systems A2

Supported Multi-rotor S1000, S1000+, S900
Input Voltage – 5v
System Weight – 550g
Deployment Time 0.5s
Minimal Deployment Height – 6m
Works with Co2 16grams cylinder Canisters available separate

DJI Dropsafe UK

SOURCE: Quadcopters Uk Shop Blog – Read entire story here.